SET FOR THE MAINTENANCE OF OIL HYDRAULIC SYSTEMS (hydraulic and gear oil as well as water-glycol HFC)
NO CUTTING PIPELINES – INST. 3 MINUTES ONLY – NO CONTAMINATION!
Test our SERV-CLIP® (PIPE MEASURING CONNECTION) IN COMBINATION WITH FLUID-CHECK® SENSORS up to 9100 psi (630 bar)-
(TRADEMARKS FROM BKM-GERMANY)
1) FLOW RATE FLUIDCHECK® / 2) LEAKAGE SENSOR FLUIDCHECK®
(Measuring range 0,5 to 600 Liter/Minute) Output : 4 to 20 mA; Temperature (-20…80°C), (Leakage measuring range from 0,02 L/min)
You get with your order a data sheet with curves mA -Liter/Minute for the requested steel pipeline in mm or inches
3) TEMPERATURE SENSOR TS-1-A-120-3/8″ (-30+120°C), 4…20mA
4) PRESSURE SENSOR DS-1-A-400-3/8″ (-20 to 80°C). 4…20mA
5) MOBILE MEASURING SUITCASE FM-1-B FOR READING RESULTS OF SENSORS
ALL SENSORS; PIPE MEASURING CONNECTIONS AND MOBILE MEASURING SUITCASE ARE QUOTED SEPARATE.
Steps for ordering :
-Measuring place of sensor : Determine diameter of STEEL pipeline (mm or inches)
-Flow rate and Leakage Sensor calibration: Instruct us with the wished measuring range L/min
-Installation : installed in 3 minutes
-Measuring :Immediately with mobile measuring kit or SPS