SOLAR200 is a innovative meter designed to perform all safety test verifies on each type of photovoltaic plants in compliance to recently standards (VDE0100, BS7671 etc..). The meter it’s very easy to use and have a wide number of internal features which are selectable by using the multilanguage menu. The meter permits, moreover, to start principal measures by using a special remote prove (PR400 optional accessory) particular useful to perform tests in very quickly mode.
A contextual help menu selectable by user it’s available for each measurement function and permits a valid information during connection of meter to the installation. The newest electronic function selector give to the meter a extreme rugged structure for perfect using “on field”.
A wide internal memory permits the saving of any measurements and the transfer to PC by serial port with dedicated software it’s possible. Each measure it’s saved with all the sub-results and test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measure was performed.
FUNCTION
Continuity test with 200mA
Insulation with 50, 100, 250, 500, 1000VDC
Trip out time of RCDs type AC, A Standard and Selective
Trip out current of RCDs type AC, A Standard and Selective
Line/Loop Impedance P-P, P-N, P-PE
Line/Loop Impedance P-P, P-N, P-PE with high accuracy (0.1mOhm with IMP57 optional accessory)
Prospective short circuit current
Contact voltage
Global Earth Resistance without RCD tripping
Phase sequence indication
Measure with remote probe (PR400 optional accessory)
Contextual help at display
Internal memory
Optical-USB interface with PC connection