In its own production history, Ceever has built a lot of machines for special purpose. Some of these experiences has developed new markets. One of the most important experience deals with the automotive tires mold cleaning machines.
The machine composed by a treatment chamber equipped with internal rotating platform where it is arranged the stamps holder. Under the treatment chamber there is assembled the main cleaning tank and externally there is arranged the rinsing tank. The complete cycle is composed by :
SPRAY WASHING with a special solution in softened water, at the maximum temperature of 80°C and a dynamic pressure between 10 and 30 bar.
SPRAY RINSING with softened water at room temperature. This phase can treat the external and internal surface of the molds in treatment. The pressure is between 2 and 3 bar.
BLOWING by compressed air coming from the line of the customer. This phase can treat the external and internal surface of the molds in treatment. The pressure is between 5 and 6 bar.
The complete cycle time depend usually on the kind of dirty but it’s usually between 40 and 60 minutes. The machine is completely controlled by PLC with HMI device and can be equipped with many optional like modem for tele-service, transfer pumps, dosing system…..etc.
The machine is built in 3 main models: Sprymaster Mold Junior (usually dimensioned for car mold type), Sprymaster Mold Senior (usually dimensioned for truck mold type) and Mould Major (usually dimensioned for agriculture mold type).