Incline knurl Nuts
Installing nuts in sheet materials which are difficult to joint
This method is easy to apply.
CharacteristicsF
1A Treatment of thin sheet.
Install this nut on sheet with thickness of not less than 0.6mm.
2A Materials that is difficult to joint with.
This nut can be used on steel materials that is hard to joint with, and also on materials such as aluminum, stainless steel and plastics.
3A High installing strength
The part under head has its unique shape, when it is pressed in, sheets are fixed, and higher installation strength is obtained.
4A Easy installation
5A No need for special tooling, air pressure and hydraulic pressure would be enough for simple installation.
6A The opposite side of nut is flat while the surface is not.
7A Still can be used after surface treatment.
Materials Sizes Surface treatment
Steel M2 M2.5 M2.6 M3 M4 M5 M6 M8 M10 M12 M16 M20 CementiteAplatingismoothj
Stainless Steel M2.6 M3 M4 M5 M6 M8
Brass M3 M4 M5
Installing techniquesF
1APut sheet on the installing flat 2AInstall Incline knurl Nuts 3APress down