3/2 and 4/2 multi-way valves; servo assisted; DN 4; flow rate: 300 l/min.; G 1/8 legris ø 6 mm port connections.
Type 5470 includes high switch reliable diaphragm seat valves as 3/2
and 4/2 way version. The valve consists of three modules, valve
body with servo-diaphragm, plungers and seat seal as well as
numerous connection possibilities for the service ports 2 and 4.
The body and valve internal parts are made of high quality thermoplastic,
the return spring of Stainless Steel. A 16 mm rocker solenoid valve type
6106 with rectifier is used as pilot. Tag connectors are used as electrical
contact (acc. DIN 43 650 Form C) with the cable plug type 2506 or with
female connectors on the available valve blocks of Burkert.
The extendable type 5470 can be used for block modules (tag connectors
in front) or for entire valve blocks (tag connectors at the back,
coil spacing 19 mm).
The available valve block can be controlled by various fieldbus systems, Multipole or common terminals.
The block assembly is made with pneumatic modules type MP05
through integrated lock technology and screwing.
Type 6106 impulse version is a bistable valve used as pilot valve for type 5470. The operation has to be done through external pole reversal (e.g. PLC).
The advantages of the impulse version are functional safety at short
time power failure, saving of energy and low heat generation.
It is applicable for switching systems with impulse control.
Advantages / Benefits
Optimal system solutions due to high level of modularity
High flow rate at compact design
Long service life even with non-lube conditions
With manual override
Extendable due to modular assembly
Various options for the service ports 2 and 4
High switch reliability
Fieldbus compatible
Wide range of cable plugs with circuitry as accessories
Low weight