SANYO DENKI EUROPE SA. is pleased to introduce their “SANMOTION R ” with built-in positioning function AC servo drives. Available in both serial interface (RS-485 Modbus-RTU) and DI/DO interface version, this serie has been greatly simplified as the positioning control unit becomes unnecessary.
Specifications :
•Main input voltage: 200 to 230VAC +10, -15%, 50/60Hz +/-3Hz 100 to 115VAC +10, -15%, 50/60Hz +/-3Hz
•Control input voltage: 200 to 230VAC +10, -15%, 50/60Hz +/-3Hz
•Power capacity: 6 models up to 300Amps
•Interface: Serial interface (RS-485 Modbus-RTU) or DI/DO interface
•R-Setup Software: Parameters setting, Auto-tuning, DI/DO configuration, Oscilloscope, Alarm History, Test mode
•Standards: CE, UL and cUL
•Positioning function specifications:
configurable positions: up to 254 points (P000 to P253)
maximum range of commands: from -2147483648 to +2147483647
command unit: mm (linear axis) or pulse (rotary axis)
point data setup: numerical input via PC, or setup by teaching
travel point number setup: parallel 8 bits (binary code) or RS-485
current limit
travel modes: zero return, manual (JOG, 1step) and point-specified travel, JUMP, REPEAT, S-CURVE…
zone signal: maximum of 8 zones
Main features :
•Simple System
A maximum of 254 positions can be pre-registered. The amplifier allows to set 4 types of servo gain patterns, speed, acceleration / deceleration and S-curve acceleration/deceleration for each target position. After moving to the first point, it jumps to the next specified point. Point command is repeatedly executable for specified times. The system can be terminated when hitting any object while moving. Since positioning control unit is unnecessary, it saves wiring and system space.
•Infinite or finite coordinates
Either infinite coordinates (where object unlimitedly keeps moving), or finite coordinates (where object moves to a constant point) are selectable. Within infinite coordinates, the object may choose shortest way to the target point.
•Serial Interface Model Added to Lineup
only 3 wirings needed for serial interface, where to 50 wirings for I/O interface. PC is directly connected as a host device. The host device can change and rewrite travel data and the parameters of points.
For further information on Sanyo Denki «SANMOTION R with built-in positioning function » AC servo drives, please contact us at +33 1 48 63 26 61 or email us at [email protected].