Technical Data
1. Dielectric: Polypropylene film.
2. Encapsulation: Flame-retardent plastic case, UL 94 V-0,
3. With epoxy resin seal: Black.
4. Temperature range: 25°C to 100°C
5. Capacitance range: 0.1 ~ 4.7µF.
6. Rated working voltage range: 1000V, 1200V, 1600V DC
7. Test category: 25/100/21 in accordance with IEC
8. DAMP-HEAT TEST: Capacitor are subjected to an environmental test chamber at R.H. 90 to 95 %, operating temperatures for 240 hours.
After the test, capacitor shall be conditioned at room temperature for 2 hours and meet the following criteria
( A ) Capacitance change shall be less than 3 %.
( B ) Dissipation factor shall be less than 0.2 %.
( C ) Insulation resistance shall be over 50 % of the minimum requirement.
9. Insulation resistance ( IR ) at 25°C: Measurement shall be mad at 25°C after applyingfor 60 Sec, at 1000VDC, Above 20,000 F.
10. Dissipations factors at 25°C (tan ): 0.1 % MAX. When measured at 1 KHZ.
11. Capacitance tolerances: ± 5 %.
12. Test voltage: 1.6 Ur, 2 sec.
13. PULL TEST: Will sustain 2 Kg steady pull in the direction of lead egress and 1 Kg steady pull at any 90 degree angle for 60 seconds. After test, capacitor shall show no evidence of damage and pass all electrical requirements.