A GOOD NEW FOR THE OIL-HYDRAULIC! SERV-CLIP® THE PIPE MEASURING POINT is a patented product and registered trade mark of BKM in Hagen-GERMANY.
– Connect into system UNDER PRESSURE
up to 630 bar (9100 psi)
WITHOUT TUBING SEPARATION IN 3 MINUTES
– (incl. M16X2) ALLOWS CONNECTION OF SENSORS
AND SCREWED COUPLINGS
CHECK IMMEDIATELY: Pressure, Temperature,
Flow Rate, Leakage, Aqua content in oil,
Particle Contamination and more
– For Diameters : 10 to 88,9 mm + Imperial NB & OD and specials
How works serv-Clip®?
FAST ASSEMBLY (3 Minutes)
A needle is pressed through the wall of the pipe. It uses the principle of plastic deformation to create a leak-proof opening.
Good quality reasons :
-No contamination of the oil through swarfs
-Working pressure up to 630 bar.
-Viton O-ring (+200°C) is supported outwards always orthogonal towards the tubular axis.
-The needle is conical and the leak proof is closed after the installation.
Measuring immediately – without tubing separation
OPTIONS :
Type 1: for mounting ON pressurized pipes
(no shutdown of your installations)
Type 2: for mounting on NON pressurized pipes (Installation of SENSORS possible!!)
TASTE SERVCLIP IN COMBINATION WITH OUR SENSORS
Flow rate (*) fluid-Check® (up to 600 Liter/minute)
Leakage (*) fluid-Check® (from 0,02 Liter/Minute)
Pressure
Temperature (*)
Oil samplings
Aqua quote (*)
Particle counters
Ventilation
(*) Installation with SERVCLIP Type 2 only possible– for non pressurized pipes. –
Contact us to resolve your Hydraulic maintenance problem under [email protected] or see our Installation videos under our website.