Currently Kemtron has 7 frame styles available from stock. To keep down production cost, vent panels made with styles 1701, 1703, 1705, 1706 & 1707 are normally supplied with 3 corners notched and the 4th joined corner welded. If required, all 4 corners of the panel can be supplied fully welded. Frame styles 1702 & 1704 are always supplied with fully welded corners.
All frame styles are supplied with a conductive gasket to provide the best electrical contact between the frame and mating metal surface. (See options for further information)
Standard tolerances for overall Finished Vent Dimensions are +/- 0.8mm
Standard tolerances on Hole Centres are +/- 0.4mm
Typical corner radii on frame styles 1701, 1703, 1705, 1706 & 1707 are R3.0mm