Author: Serkadis

Mech-tex, a leading company in the production of reduction gearheads for synchronous / stepper / FHP & dc motors; proudly announces the newly developed gear series GB B.it is a spur reduction gearhead with 33mm OD & OFF centre shaft meant specially for DC motors with diameters 24, 28 , 30 & 32mm.
It has a possibility of 2 to 8 stage reduction with ratios from 8:1 to 1953.125:1. in this initial stages are poly-acetal gears (1st pair being helical) & final stages are steel sintered gears maintained.
the nominal torque rating for this gearhead is defined to be 0.8Nm & we have the possibility to mount a permanent magnet stepper motor of diameters 20, 28 ,30 & 36mm with this gearhead.
kindly send your requirements , suggestions & queries related to this gear series on [email protected].

Detection Technology further strengthens its position as the leading supplier of industrial X-ray line scanners by introducing a compact and cost-effective X-Scan c4 series to complement the successful X-Scan f3 product family, especially in the food inspection.

X-Scan c4 introduces a broad range of new features designed to simplify the structure of industrial X-ray machines and to cut down the overall system cost.

The X-Scan c4 series is the optimum detector solution for industrial X-ray inspection machines where the conveyor width is 600 mm or less, where frequent washing of the machines is needed, where plastic conveyors are used or where a multi-view inspection system is required.

With a fully configurable feature set, the X-Scan c4 can also be cost-optimized for the X-ray machines targeted to replacing metal detectors in the food processing lines.

The main features of the X-Scan c4 series are:
– enhanced performance
– compact, waterproof enclosure with IP66 classification
– high tolerance to electro static discharge (ESD)
– USB interface support for multi-view systems
– lower maintenance and upgrade costs due to firmware upgrade via USB interface
– flexibility due to selectable resolution

The LES series linear units with spindle drive feature a modular configuration and can be used for many applications.

The rigid aluminium profiles with precision steel shafts form the basis. The feed motion is carried out with ball screw assemblies, stepper motors or servo motors are used as power drives.

The LES series linear units can be used horizontally as well as vertically. The patented shaft slide with continuous ball race is used as the guide slide. The supporting balls run between 2 ground steel pins and the guide shaft. Available in sizes up to 3 metres long, per customer specifications.

Aluminium shaft profile – W 125 x H 47 mm
Length: 0.5 / 1.0 / 2.0 / 3.0 m – 2 precision steel shafts Ø 12mm with precisely milled shaft intakes.
4 aluminium slides FS-12-O – Centralised lubrication option
with 2 limit or reference switches, repeat accuracy ± 0.02 mm
Ball screw assembly Ø16x5mm – Motor module with servo motor

The CIELab Color Sensor PR0094 is a color detection system for media in the visible spectrum of light and disposes of an internal light source.

31 Products from white to black can be tested independently from each other without changing the gain or any other parameter.

The sensor comes with 5 binary coded product outputs for releasing the detected color. Here the product that should be detected is constantly illuminated via a light source.

The parameterization and evaluation takes place in the CIELab color space. The sensor captures all 3 color channels in parallel. The cycle time for control via digital inputs is approx. 50ms.

The parallel capturing of all color channels as well as the specific measurement procedure lead to a high suppression of environmental effects.

The coupling of light is carried out via light guides. Here not only point-shaped areas but also larger areas can be controlled for matching of color. The module evaluates the area as sum signal.

Coventry, 20th January 2010 – FARO, the world’s leading provider of portable measurement and imaging solutions, announced that they have sold several units of their latest 3D measurement system – the FARO Laser Tracker ION

The portable measurement systems have been purchased by companies from the growing Aerospace and Power Generation industries. One of the companies which has acquired the new system is Brookhouse Tooling Limited, a major Aerospace supplier with supply positions on many key aircraft programme’s.
They will use the ION to check Aerospace tooling and fixtures as well as alignment of composite lay up tools. Angus Fielden, Quality Manager at Brookhouse Tooling Limited explains why the company decided for FARO’s system: “Having purchased a FaroArm Quantum in December 2008, FARO have shown true commitment to their customer’s requirements. Not only do they strive to achieve affordability, but the accuracy, quality of product and outstanding level of customer service grows better year by year. In 2009, a difficult year for all, FARO have supported above and beyond expectation, and excelled throughout.”

Another customer who is convinced by the outstanding performance of the ION is Drax Power Limited, the owner and operator of Drax Power Station, the largest, cleanest and most efficient coal-fired power station in the UK. According to Turbine Engineer Steve Austin, the laser tracker will be employed to reduce the duration of maintenance outages on its steam turbines, whilst offering a significant improvement in accuracy.

The FARO Laser Tracker ION features a longer measurement range, lighter weight, and contains the fastest, most sophisticated distance measuring system: Agile Absolute Distance Meter. Specifically, the ION has improved the volumetric accuracy by 27% over the previous model to .002” at 33 feet. The measurement diameter range has been extended by 36% to 361 feet, and the weight has decreased by 12% to 39lbs.

“At FARO, our goal is to continuously provide advanced solutions that empower our customers,” stated David Homewood, Area Vice President of Sales for the UK, France and Benelux. “Those sales are proofing that we’re meeting the requirements of the market with the ION. It is the ideal tool for anybody who needs to carry out quick and precise measurements – especially for large parts and composites and especially in difficult environments. We are very confident that the ION will continue to be a success on the UK market.”

MEDER electronic, Inc. today announced the release of their new LS05 Liquid Level Sensors , made of tough stainless steel tubing, these sensors can be customized up to 6.5 feet in length, detect multiple liquid levels and withstand exposure to many chemical solutions, high pressure and high temperatures.

The LS05 Series Liquid Level Sensors is the most diverse level sensor yet, combining hundreds of standard options ranging from switching power and connectivity to fluid types and number of liquid levels. The LS05 housing stem, constructed of V2A stainless steel can vary in length up to 6.5 feet long and hold any number of magnetic floats with a minimum spacing of 1.5” between them. Its stainless steel housing will withstand high pressure up to 12bar and temperatures up to 200°C when coupled with stainless steel floats. Choose from 10 different magnetic floats, available in four different materials: Polyamide (PA), Polypropylene (PP), Nitrile Butadiene Rubber (NBR) and Stainless Steel (V2A).

Mix and match more than one float material to detect multiple fluid types in the same tank, such as in a diesel tank that may build up water condensation over time. The LS05 can be mounted to the top or bottom of a tank or reservoir using a number of different mounting options. Using our OKI and KSK Reed Switches, the LS05 can switch low and high voltages up to 1000 Volts and produce single, multiple or continuous output signals. The LS05’s multitude of standard options simplify the process of designing a liquid level sensor for such a diverse array of liquid detection applications.

CTS has developed an new Salt Spray Chamber to fullfil the new VDA test.
This equipment is manufactured to realise a mix of different climatic condition.
– minimum in temperatur -20°C
– climatic condition
– salt spray
Lots of option are available like:
– recording and programation throught CID
– entry port
– internet interface….

Rugged New Q-Switched DPSS Laser Delivers >10 W at 355 nm
– January 20, 2010 – Spectra-Physics®, a Newport Corporation Brand, announces a new addition to its Pulseo® family of Q-Switched diode-pumped solid-state (DPSS) industrial lasers. The rugged and reliable Pulseo 355-10 provides 10 W of 355 nm output at 90 kHz with a short pulse width of <23 ns. Key applications for the Pulseo 355-10 are crystalline silicon photovoltaic solar cell manufacturing processes such as wafer scribing and dicing, drilling, and marking. The high power industrial laser is also ideal for microelectronics applications, such as via hole drilling, flex circuit cutting, flat panel manufacturing, ITO patterning, LED substrate scribing, silicon wafer dicing/scribing and low K dielectric scribing. The Pulseo 355-10 has a short pulse width (<23 ns at 90 kHz) and high peak power. These characteristics, combined with higher repetition rates, reduce undesired thermal effects and results in higher throughput with less damage to the parts. According to Tim Edwards, Senior Marketing Manager for Newport's Spectra-Physics Laser Division, “The design of the Pulseo 355-10 features the same strengths as our other Pulseo family of products, including long life, excellent beam quality and stability, compact design, and field-replaceable key components such as diodes, fiber, and output window. This field serviceability, combined with strong reliability and global service and support, makes the Pulseo 355-10 the perfect choice for high-uptime industrial applications.” Edwards continues, “In addition to excellent performance, the Pulseo 355-10 is also an exceptional value, measured both in cost per watt, and cost of operation over the life of the laser.” The new Pulseo 355-10 will be introduced at SPIE Photonics West at The Moscone Center, San Francisco, CA, January 26-28, 2010. Please stop by Newport's booth #1401 for a demonstration. About Newport Corporation Newport Corporation is a leading global supplier of advanced-technology products and systems to customers in the scientific research, microelectronics manufacturing, aerospace and defense/security, life and health sciences and precision industrial manufacturing markets. Newport's innovative solutions leverage its expertise in high-power semiconductor, solid-state and ultrafast lasers, photonics instrumentation, sub-micron positioning systems, vibration isolation, optical subsystems and precision automation to enhance the capabilities and productivity of its customers' manufacturing, engineering and research applications. Newport is part of the Standard & Poor's SmallCap 600 Index and the Russell Microcap Index.

Flexicon Corporation have introduced a new Hygienic Bulk Bag Conditioner for loosening of bulk solid material that has solidified during storage and shipment, allowing bulk bag unloaders to discharge it through bag spouts.

The stainless steel conditioner features two hydraulic rams with specially-contoured end plates that press opposite sides of bulk bags.

An optional hydraulically-actuated, variable-height turntable allows conditioning of the bag at all heights on all sides. The number and pressure of hydraulic ram actuations, the height of the turntable, and the number of 90-degree rotations are user adjustable.

The hygienic model is intended for bulk bags containing solidified bulk food and other contamination-sensitive products that cannot be loosened using pneumatically-actuated flow promotion devices integral to bulk bag dischargers. Carbon steel models with durable industrial coatings are offered for general industrial applications.

The unit measures 2210 mm H X 3378 mm W X 1981 mm D, and accommodates bulk bags of all popular sizes. It is fully enclosed on all four sides for operator safety and includes full-height doors that are interlocked to disallow operation of the system when the doors are open.

The system controller and hydraulic pump can be mounted remotely or on the exterior of the safety cage, and require only an electrical power connection for operation.

The company also manufacture bulk bag dischargers with or without integral bulk bag conditioners, as well as bulk bag fillers, flexible screw conveyors, pneumatic conveying systems, manual dumping stations, drumbox/tote dumpers, weigh batching systems, and automated plant-wide systems integrated with new or existing process equipment.

For information contact Flexicon (Europe) Limited, 89 Lower Herne Road, Herne, Herne Bay, Kent CT6 7PH, UK, +44 (0)1227 374710, [email protected], www.flexicon.co.uk.

Orbital grinding machine using abrasive belts for high volume requirements, for grinding, buffing and satin finishing of STRAIGHT LENGTHS of stainless steel, brass, iron, aluminium or any other metal having round, oval, ellyptical or irregular section.

Machine is equipped with a SELF-CENTERING feed that enables processing of taper and shaped parts.
Further STANDARD EQUIPMENT supplied with the grinding machine are: feed speed adjustable with “inverter” equipment complete of digital display for direct reading, motors voltage 400V/50Hz, n°4 abrasive belts in different grits, service keys, instructions book and CE conformity declaration.

Complete fan unit for decentralised WRG 35 ventilation unit with heat recovery, nominal size 350 mm, including internal cover and two G4 filters

Application examples
Apartment, Renovation, Flat occupying the whole of one floor, Tenant apartment, Single family-unit house

E2S, the leading European manufacturer of warning devices for use in hazardous areas, has extended its capabilities with the development of intrinsically safe and explosion proof manual call points, certified to both ATEX and IECEx standards. The IS-CP4 intrinsically safe units are approved for use in Zones 0, 1 and 2 environments and the BExCP3 Ex e d explosion proof versions for Zones 1 and 2. Both types are available with either break glass or push button operation. The devices are manufactured from corrosion proof, copper free, marine grade LM6 alloy and are sealed to IP66, enabling them to be used in both offshore and onshore installations.

A comprehensive range of standard accessories and options can be specified; they can be fitted with a stainless steel lift flap and series and EOL resistors in a range of different values can be fitted as required. The units can be fitted with stainless tag and duty labels and, normally finished in red powder coat finish, special colours can be specified to enable rapid visual identification of special functions.

The introduction of this new family complements the well-established BEx range of explosion proof sounders, beacons and loudspeakers and the IS-mini modular sounder and beacon family.

The new item Angle Locking Bracket 8 80×40 allows to interconnect profile structures at any chosen angle. This new fastening element of the MB Building Kit System is ideal for use in versatile constructions for free adjustable devices such as ergonomically designed workstations, stand-alone shelves, shelving units and similar.

The handwheel allows an individual adjustment without minimum physical effort so as to guarantee operating safety when flexibility and quick changes on a component are required. Integrated toothing enables brackets to be secured rigidly so that they can support high loads. A spring mechanism is located under the handwheel. When the handwheel is loosened, 2 springs slidingly raise the securing clamp plate, which is removed from the toothing. The bracket is released so that the user can adjust the angle and lock it again with little physical effort. A degree graduation on the disk allows a precise adjustment by 2 ½-degree steps to be read and found again.

The Angle Locking Bracket 8 includes a massive die-cast bracket and can be easily screwed to the profile groove 8 without machining.

Telco is proud to introduce a new range of Fork light barriers to compliment its range of high performance infrared sensors.
These fork sensors are the most versatile, offering a spread of between 2 mm and 220 mm so even the smallest and fastest particle falling between the fork opening can be detected with the utmost reliability.
The sensors are supplied in a black anodised aluminium housing with M8 connector. NPN and PNP or NPN/PNP output, sensitivity adjustment, high resolution and high operation frequency are amongst some of the most significant features in this range.
The fork sensors in this range are not restricted to labelling and packaging machinery or assembly lines but are ideal for any application where detection and monitoring of a small part is necessary with minimum mounting, connection and cost.
Telco’s high performance and reliability is apparent in this range also and naturally the range also boasts Telco’s World-wide stock and service.

Electro transporters and electro tow tractors for tough everyday logistics

The new electro transporters and electro tow tractors of the Hako Sherpa S range have been especially designed for logistics tasks – even under heavy duty application conditions. Powerful drive motors with three phase current technology, a particularly robust chassis combined with a comfortable workplace offer all prerequisites for a long life and economical usage.

In the S Series there are currently two models available:
The Hako Sherpa S 8 is equipped as a transporter with a load area of 1,315 x 890 mm, suitable for a standard pallet with a useful load of up to 800 kg. In addition the Hako Sherpa S 8 can also still tow a trailer load of up to 2 t. With additional individual built-on attachments the electro transporter can be adapted for various application purposes and requirements.

The Hako Sherpa SX 60 serves for pure towing tasks with trailers; it can tow up to 6 t. Thee is also room for additional smaller loads on the 440 x 830 mm load area of the Hako Sherpa SX 60.
With an outer turning circle of only 2,085 mm the Hako Sherpa SX 60 is particularly manoeuvrable. For this machine Hako offers the corresponding axle-swivel steered standard trailers; in addition heavy load or special trailers can be manufactured at the customer’s request.

The suspension – on all three wheels in the case of the Hako Sherpa SX 60 or the front wheel for the Hako Sherpa S 8 respectively – ensures drive comfort and protects the driver and load, even on uneven surfaces.

The 5 kW powerful, low maintenance three phase current drive allows the Hako Sherpa S Series machines to accelerate to a maximum speed of up to 17 km/h; thus gradients of up to 20 % pose no problem.

An electric motor brake, which works free from wear and tear, brings the machines to a stop safely. In addition both models have a hydraulic working brake on all wheels (for the Hako Sherpa S 8 with front wheel brake as an option).

A large choice of seats, the steering column, which can be adjusted in 5 stages and the simple operation give the driver a high level of comfort even when the working day is long. If the machines are to be used in outdoor applications then an optional cover provides protection against the weather. Furthermore road licensing is possible for both machines.

With a working width of up to 118 cm and a maximum area performance of up to 7,800 m²/h the Hakomatic B 1050 is the new large area scrubber-drier from Hako for use in shopping centres, in multi-storey car parks or in logistics and industrial areas. At the CMS 2009 Hako presents the Hakomatic B 1050 – now also with cylindrical brush unit for thorough cleaning of rough and structured floors.

Thus there are now two versions available for intensive floor cleaning: firstly the Hakomatic B 1050 with plate brushes. Here two plate brushes ensure a high degree of effectiveness thanks to the direct drive via two electro motors (IP 54) protected against water spray. As the result of a movable suspension and a wide coverage the scrubbing brushes can be adapted well to uneven floors. In addition the side scrubbing unit, mounted on the right and available as an option, ensures cleanliness in edge areas. At the same time the working width increases from 102 cm to 118 cm.

What is new is the Hakomatic B 1050 with cylindrical brush unit: it is always the right solution when particularly rough or structured floors have to be cleaned. Not only does the cylindrical brush unit scrub the floor over a working width of 96 cm particularly intensively, but it also offers an integrated sweeping function. In doing so the dirt is collected in a separate dirt hopper. As an option the cylindrical brush unit can be extended by two additional side brushes. They enable the collection of coarse and fine dirt over the complete squeegee width = two operations become one!

Thanks to the electronic drive control of the gear motor on the steerable front wheel, the battery electric drive allows an infinitely adjustable drive speed between 0 and 8.2 km/h. The maximum drive speed can be programmed individually. In addition the powerful motor offers power reserves for gradients of up to 15 % – which means that the cleaning of e.g. multi-storey car parks is no problem. Furthermore the powerful battery enables a particularly long running time with only one battery charge.

With the conception of the Hakomatic B 1050 the developers always had the environment in mind: the emission-free drive enables clean work, the Hako Aqua Control System saves water and cleaning agent and recyclable materials and components have been used throughout the whole machine.

With the new CM wormgearboxes, we have improved the technical characteristics of our previous range, improving therefore other wormgearboxes on the market. These gearboxes can be recognised immediately thanks to the new design and plastic cover assembled on every unit (which can easily be removed if necessary).

The letter ‘G’ can be found on the plastic cover and on the rear input side of the housing. This letter is part of our new logo “TRANSTECNO GENUINE PRODUCTS”, and relays the originality of our products from the drawing board to production.

Here you can find the main differences:

A) New housing design is neater and more linear. This is an important aspect for the food industry where cleanliness is a priority.

B) Breather plugs will no longer be used. Our experience gained over the years highlights the fact that in most cases they are not necessary. They will however be available on request.

C) The gearing teeth data has been recalculated. This increases the transferred torque and gearing efficiency.

D) Wider range of ratios. Ratio 1/100 is now available for size 30.

E) Input oilseals in polyacrilic are used on sizes 26, 30, 40 and 50. They have a higher temperature range than the traditional NBR (up to 150°C) and guarantee less friction (useful in DC motor applications).

F) Wider range of IEC flanges. 56B14 is now available for size 40 and 63B14 is available for size 50.

G) Size 110 is now made in aluminium housing (previously in cast iron).

H) The whole range will be supplied with a plastic cover which can be easily removed/assembled.

The newest addition is our bronze casting machine. This internal section allows us to completely control every step of the casting process (casting of the bronze wheel rim onto the cast iron output shaft).

The New CM range is completely interchangeable with the bevel helical gearboxes from the CMB range. Just recently introduced, they are already proving to be a success on the market due to their flexibility and technical qualities.

The Spectra-Physics® Inspire™ Blue is an innovative, easy to use and reliable doubling unit that efficiently converts the IR emission of Ti:Sapphire lasers (690–1040 nm) into the near-UV and visible wavelength range (345–520 nm).

Based on novel nonlinear technology, the Inspire Blue doubler provides exceptional beam quality, high conversion efficiency (up to 50%) and reduced pulse broadening. The unit is available in both manual and automated versions and is compatible with the Spectra-Physics Mai Tai® HP femtosecond output as well as the Spectra-Physics Tsunami® HP femtosecond and picosecond outputs.

The Inspire Blue doubler also features synchronized outputs–the converted output in the near-UV and visible wavelength range (345–520 nm) and the unconverted fundamental output in the IR range (690–1040 nm)–enabling use of both beams in simultaneous experiments. Complete wavelength coverage is achieved with a single optics set to increase flexibility.

The Inspire Blue doubling unit is an excellent tool for a wide range of applications requiring femtosecond light pulses at MHz repetition rates.

Manlight Miniaturized Laser Transmitter (MLT) has been selected as the “Product of the Year 2009” by Photonics Tech Briefs Website readers.
Dedicated to LIDAR applications (telemetry, range finding, imaging, guidance, etc..), this unique laser has adjustable pulse width and can be optimized to your requirements to provide up to 30µJ per pulse in the smallest footprint available to our knowledge.
The MLT-PL-R-OEM is a very compact (90 x 70 x 15 mm3 only) pulsed fiber laser providing short to ultra short pulse duration (1ns to 50ns pulse duration available) through a near diffraction limited randomly polarized beam (M²<1.1). Our patented “Injection Technology” allows the use of highly reliable broad area laser diode pumps, for a cost-effective and maintenance-free operation. The all-fibre design guarantees the robustness of the system, without any optical parts to align or to stabilise. The simple integration of the OEM system requires no after-installation service. We thank you Photonics Tech Briefs readers for their vote and welcome everybody to request some more information directly from Manlight.

Published Jan. 22, 2010
By Keith Leventhal, KEPR TV

While our local hockey and basketball players are pretty good athletes, they’ve got a ways to go before they become professionals.

However, its probably safe to say that at least one or two of them will make it to that level.

Some of the Tri-Cities biggest success stories were back in town Thursday night for CBC’s 4th annual “Follow Your Dreams” banquet.

One of the school’s alums that made it big was former baseball star Ray Washburn.

After leaving CBC, he went on to a 10 year career in the major leagues.

He pitched for both St. Louis and Cincinnati…and he won a World Series ring and threw a no-hitter during his career.

But, even with all that success, he’s always been connected to CBC, including some surprising ties with the Hawks athletic director Scott Rogers and their baseball coach Steve Farrington.

Washburn says, “When I was coaching baseball at Bellevue, Scott was my 1st baseman, so, it kind of, we kind of come around, and I played, coached against Steve Farrington, he was at Lower Columbia at the time, so we always have a lot of head battles, so it was good to see Steve too.”

Washburn wasn’t the only baseball star at Thursday night’s event.

Pasco-native and Detroit Tigers pitcher Jeremy Bonderman was also in the crowd.

And all of those stars helped raise $25,000 for the CBC athletic department.